1
User instructions
The diagnostic module type SPC200-MMI-DIAG is designed for
diagnosing the SPC200 Smart Positioning Controller. The
diagnostic module has 2 serial interfaces. One interface is for
connection to a type SPC-MMI-1 control panel and the other is
for connection to a PC. The serial interface for the PC is in the
form of a 9-pin Submin-D connector and complies with standard
RS-232.
Detailed information about the module can be found in the User
Manual P.BE-SPC200-....
CAUTION
Pay strict attention to the following instructions shown
therein:
– safety guidelines
– specifications for the use of each module and component.
WARNING
Actuators can be accidentally activated and the SPC200
damaged, if modules are inserted or removed with the
power switched on.
Before installation or maintenance work switch off the follow-
ing power sources in the following order:
1. Compressed air supply
2. The load supply and operating voltage supply of the
SPC200.
SPC200-MMI-DIAG
9804NH
11
