Festo SFAB-10U Operating Instructions Manual Download Page 4 | Manualshive

Page: 4 / 8

Festo SFAB-10U Operating Instructions Manual Download Page 4

Fig.13

The  following  settings  are  displayed  for  OUT  A:
With  flow  measurement  [FLW]:
the  switching  function  (threshold  value  or  window  comparator)
switching  point  [SP],  switching  points  [SP.Lo]  and  [SP.Hi]
hysteresis  [Hy]
switching  element  function  [no/nc]  (closer/opener)
minimum  flow  value  [F.Lo]  (Flow  Low).

In order to delete the minimum value, press the EDIT button briefly.

maximum flow value [F.Hi] (Flow High).

In order to delete the maximum value, press the EDIT button briefly.

With  air  consumption  measurement  [ConS]:
air  consumption  switching  impulse  [CI]
switching  element  function  [no/nc]  (closer/opener)
minimum  flow  value  [F.Lo]  (Flow  Low).

In order to delete the minimum value, press the EDIT button briefly.

maximum flow value [F.Hi] (Flow High).

In order to delete the maximum value, press the EDIT button briefly.

The  following  settings  are  displayed  for  OUT  B:
the  switching  function  (threshold  value  or  window  comparator)
switching  point  [SP],  switching  points  [SP.Lo]  and  [SP.Hi]
hysteresis  [Hy]
switching  element  function  [no/nc]  (closer/opener)
colour  change  status  [bLUE/rON/rOFF]
minimum  flow  value  [F.Lo].

In order to delete the minimum value, press the EDIT button briefly.

maximum flow value [F.Hi].

In order to delete the maximum value, press the EDIT button briefly.

5.4 EDIT mode

Fig.14

«
...
2
3
4
5
6
...
»

Summary of Contents for SFAB-10U









Reviews:

No comments