1
Safety and requirements for product use
10
Festo – P.BE-MPA-EN – 1309f – English
1.1
Safety
1.1.1
General safety instructions
Note
Damage to the product from incorrect handling.
•
Switch off the supply voltage before mounting and installation work. Switch on sup-
ply voltage only when mounting and installation work are completely finished.
•
Never unplug or plug in a product when powered!
•
Observe the handling specifications for electrostatically sensitive devices.
1.1.2
Intended use
The valve terminal MPA-S is intended for installation in machines or automated systems and may be
used only as follows:
–
in excellent technical condition,
–
in original status without unauthorised modifications,
–
within the limits of the product defined by the technical data (
Appendix A),
–
in an industrial environment.
The limit values specified for pressures, temperatures, electrical data, torques etc. must be observed.
Comply with the legal rules and regulations and standards, rules of the testing organisations and insur-
ance companies and national specifications applicable for the location.
Note
In the event of damage caused by unauthorised manipulation or other than intended
use, the guarantee is invalidated and the manufacturer is not liable for damages.
Summary of Contents for MPA-S
Page 165: ...C Glossary Festo P BE MPA EN 1309f English 165 C Glossary...
Page 168: ...C Glossary 168 Festo P BE MPA EN 1309f English...
Page 172: ...MPA S 172 Festo P BE MPA EN 1309f English...
Page 173: ......
