Festo IIFB11-02 Series, Manual

Page: 113 / 210

Example
Valve terminal Input bytes Output bytes
Valve sensor terminal #3 4 4
Valve sensor terminal #4 3 3
Valve terminal #5 0 4
Valve terminal #6 0 3
When you press the "CONF" key, the following
figures will appear in the seven segment
display of the DLC 100/200.
•
4 (=number of recognized network modules)
•
12 (=number of input bytes)
•
10 (=number of output bytes)
If the values shown agree with the calculated
values, you can transfer these to your project.
In the example below, the number of I/O bytes
has been rounded up, in order that the
addresses are not shifted if extensions are
made at a later date.
Fig 5/10: I/O-configuration DLC 100
VIFB11 - 02 5. Commissioning
9902d
5-17