HSW−...−AP/A S
Festo HSW−...−AP/AS 0812b English
48
Ple
as
e note
For HSW−...−AS with electric motor:
Movement to a fixed stop creates impulsive loadings in the drive train. This can
cause damage to the gears, for example.
S
Always use reduced energy during reference runs to the fixed stops
(
1
/
9
The rubber buffers in the fixed stops are only for silencing.
Ple
as
e note
For HSW−...−...W:
S
Please observe the warnings and instructions in the brief description for
BAW−HSW.
S
Pressurize the add−on components.
S
If necessary, carry out a separate test run to check that the add−on compo
nents are functioning correctly.
A
tt
ac
h
m
ent
c
o
m
ponent
s
T
e
s
t
s
Without work load
Check the correct assignment of the compressed air
connections
Gripping speed
Function of the proximity switches
With load
Check that the work load is gripped firmly
Fig.22
S
Pressurize the drive in one of the following ways as desired:
slow pressurization of one side
simultaneous pressurization of both sides with subsequent exhausting of
one side
Ple
as
e note
The swivel module DSM for HSW−...−AP may only be operated unmodified as
supplied from the factory and with the protective cap (if present).
