FDG-...-ZR-RF
Festo FDG-...-ZR-RF 2018-12a English
6
6
Fitting
Mechanical components
S
Make sure that this condition is observed:
Rated stroke FDG-...-ZR-RF
≥
Rated stroke drive axis
Example (type plates): FDG-40-800-ZR-RF
≥
DGE-40-800-ZR-RF
Only in this way will the multi-axis system function free of collision in the end
positions.
S
Please note that the rated stroke can be defined differently depending on the
axis and the manufacturer:
Definition of the rated stroke
with FDG-...-ZR-RF and DGE-...-ZR-RF:
with other axes/manufacturers:
r
r
h
h
h
h
h: Rated stroke
r: Stroke reserve
S
Position the FDG-...-ZR-RF without tension
or bending (evenness of mounting surface:
0.2 mm/30 cm).
Axis fastening kits, centre supports and foot
fastenings will assist you here.
Please note
Take into account that, in the case of heavy loadings, the axis must not be
fastened only at the cover caps.
Excessive tensile loads will cause the cover screws to be pulled out.
Fig. 5
