FDG-...-ZR-RF
Festo FDG-...-ZR-RF 2018-12a English
11
8
Care and maintenance
S
Recommendation:
Return the product to Festo for inspection after every 10,000 kilometres run.
S
Do not adjust screws or threaded pins for which there are no direct demands
for modification in the operating instructions.
Lubricating the roller guide
S
Lubrication interval: as required, in principle at least after 10.000 km.
S
Note that lubrication must be carried out more frequently:
– in dusty and dirty environments,
– with very short work strokes (running-in at a position).
S
Lubricate the FDG-...-ZR-RF at the lubrica
tion nipples on both sides of the slide.
Oil: e.g. Constant OY 390 from Klüber,
München
Grease gun: see Accessories.
Fitted into restricted spaces:
S
Use blast pipe B (axial opening) or C
(radial opening) instead of the stan
dard blast pipe A.
S
Move through the rated stroke once completely in order to distribute the oil
evenly in the interior of the FDG-...-ZR-RF.
At each maintenance procedure:
S
Check that the slide is set free of play and distortion.
If you find something unusual, see the chapter “Eliminating faults”.
9
Repairs
Faults during operation
S
Make sure that the FDG-...-ZR-RF is overhauled only by our repair service
(e.g.if there is play between the slide and the guide).
In this way you will prevent damage to the axis at a later stage. The repair
procedures require settings with very accurate adjustments.
Fig. 14
A
B
C
