24
Festo — EXCT — 2022-03a
Assembly
Mounting "with slot nuts on the profile bottom of the Y-axis" is only permitted at the third/centre
mounting position with a Y-axis stroke of
>
1500 mm
6.2.4 Mounting space and number of fas-
teners.
In the delivery status the axis locks mounted on the product prevent movement of the Z-axis. To move
the Z axis
6.5.1 Manually moving the Z-axis
Procedure
1. Observe the safety instructions
2. Remove the transportation locks
6.2.7 Removing transportation locks.
CAUTION
Risk of injury from the product tipping or falling.
• Place the product on stable bases, e.g. mounting tables, and secure it to prevent it from tipping
or falling.
NOTICE
Risk of damage to the Z-axis if subjected to stress.
• Do not subject the interface or Z-axis to stress when handling and positioning the product.
