Festo ELGC-TB-KF, Instructions & Operating

Page: 7 / 20

– Take the required support spacings into consideration
è
13.2 Technical data, characteristic curves.
7.2 Mounting
1. Select mounting components è www.festo.com/catalogue.
2. To prevent collisions, mount the mounting components outside the positioning range.
3. Attach the axis to the profile (e.g. with profile mounting EAHF-L2).
4. Tighten the screws.
Fig. 4
7.3 Attachment
Requirements
NOTICE!
A warped attachment component bends the slide and shortens the service life of the guide.
•
Use an attachment component with an even surface. Evenness: t = 0.01 mm
Fig. 5 Use an even attachment component
1. Position the attachment component.
Keep the tilt moment resulting from the force (parallel to the axis of movement) and lever arm as
small as possible.
2. Avoid collisions of the mounting part and payload with other attachments.
Mounting
7 Festo — ELGC-TB-KF — 2018-08a