Festo EHPS Series, Instructions & Operating

Page: 4 / 26

1 About this document
1.1 Further applicable documents
All available documents for the product
è
www.festo.com/pk.
1.2 Product labelling
Warning symbols on the product
Symbol Meaning
General warning indicator:
The symbol means a hazardous area and that the operating instructions must be read
and observed.
Tab. 1 Warning symbols on the product
2 Safety
2.1 Safety instructions
– Observe labelling on the product.
– Prior to assembly, installation and maintenance work: Switch off power supply, ensure that it is
off and secure it against being switched back on.
– Store the product in a cool, dry, UV-protected and corrosion-protected environment. Ensure that
storage times are kept to a minimum.
– Observe tightening torques. Unless otherwise specified, the tolerance is ± 20 %.
– The occurrence of a failure could lead to unforeseeable movements if the gripper is connected
with the power supply. Only operate the gripper once protective measures have been taken
against mechanical threats to body parts.
2.2 Intended use
The intended use of the product is to grip and hold payloads (workpieces) using custom-designed
gripper fingers attached by the customer.
The gripper fingers are not included in the delivery.
When not used as intended, the product-supported protection can be impaired.
2.3 Training of specialised personnel
Installation, commissioning, maintenance and disassembly should only be conducted by qualified per-
sonnel.
The qualified personnel must be familiar with installation of electrical control systems.
3 Additional information
– Accessories
è
www.festo.com/catalogue.
4 Service
Contact your regional Festo contact person if you have technical questions
è
www.festo.com.
About this document
Festo — EHPS — 2018-06 4