17 / 18
Festo 7CRDSNUb_en
7
Tools
This chapter provides an overview of the tools and accessories required to repair the cylinder with piston rod.
7.1
Standard tools
The following standard tools among others are required to repair the cylinder with piston rod:
•
Screwdriver
•
Wrench
•
Torque wrench (see tables in the corresponding repair steps for values)
7.2
Special tools
The following special tools are required to repair and service the cylinder with piston rod:
Designation
Additional information
Illustration
Mounting sleeve for piston rod
The mounting sleeve for piston rods for
protecting the piston rod seal and the bearing
in the bearing cap while the repair is
being carried out must be produced by
the customer.
The schematic diagram can be found in
the information brochure
"Accessories,
equipment and tools"
(7Accessories_a_en).
Documents
Further information on the special tools and schematic diagrams can be found in the information brochure
"Accessories, equipment and tools"
(7Accessories_a_en). It can be found in the online spare parts catalogue on
the Festo website (
http://spareparts.festo.com/xdki/data/SPC/0/PDF_SAFE/Hilfsmittel.pdf
).
8
Liability
The General Terms and Conditions of Sale of Festo AG & Co. KG, which can be viewed on the Festo
website (
www.Festo.com
), apply.
