Festo CPX-FB6 0201NH English
22
4
Technical specifications
Type
CPX-FB6
General technical specifications
See CPX system manual
P.BE-CPX-SYS-..
Protection class as per EN 60529
IP65 (fitted completely)
Protection against electric shock
(protection against direct and indirect
contact as per EN 60204-1/IEC 204)
By means of PELV power
units (Protected Extra-Low
Voltage)
Internal current consumption at 24 V
– From operating voltage supply for
electronics/sensors (V
EL/SEN
)
Typ. 50 mA
(internal electronics)
Field bus
– ID code
– IO code (process data channel)
– Design
– Electrical isolation
– Incoming interface
– Continuing interface
– Transmission type
– Protocol
– Baud rate
– Cable type (remote bus without
additional power supply, max. cable
capacity)
– Cable length at 500 kBd
– between two remote bus slaves
– of the complete system
1, 2, 3, 243
1)
16, 32, 48, 64, 80, 96
1)
RS 422, floating
Electrically isolated
Non-floating
Serial asynchronous, full
duplex
Interbus
500 kBaud, 2 MBaud
LI-YCY, 3 x 2 x 0.25 mm
2
,
120 pF/m
Max. 400 m
Up to 12.8 km
1)
Depends on equipment fitted
