Festo control block CPX-CEC
3.6
Connecting an operator unit CDPX
The operator unit CDPX is a display for executing and monitoring automation tasks at the field level.
•
Refer to the accompanying user documentation when installing the device.
Figure: CPX-CEC-...-V3 with operator unit CDPX
•
Connect the CDPX to the CPX-CEC-...-V3 directly via the Ethernet interface or indirectly via a
switch/hub.
•
Make sure that the settings for the subnet mask are the same on both devices (e.g. 255.255.0.0).
Further information can be found in the user documentation for the CDPX.
18
Summary of Contents for CPX-CEC-C1-V3
Page 2: ......
Page 6: ......
Page 54: ...Festo control block CPX CEC Figure Settings on channel 1 Figure Settings on channel 2 48...
