Festo CPX-2AA Series, Brief Description

Page: 28 / 86

Festo CPX-AX 1107d English
28
Output module CPX-2AA-U-I
(continuation) Voltage outputs Current outputs
– Operating voltage supply
– Rated voltage
– Max. current consumption
at 24 V
V
EL/SEN
(electronics/sensors)
DC 24 V ± 25%
Type 100 mA (maximum current
consumption at outputs)
– Load voltage supply (actuator
supply)
– Rated voltage
– Undervoltage V
OUT
(load voltage outside of
functional range)
– Load capacity (max. cur-
rent consumption at 24 V)
– Fuse
– Behaviour after end of
overload
– Reverse polarity protection
24 V actuator supply
– Inverse voltage resistance
V
OUT
(outputs), one connection per
output, same supply potential at all
outputs
DC 24 V ± 25%
≤ 17 to 14 V
(initiates diagnostic message
undervoltage V
OUT
)
> 2.8 A (max. permanent current
per module)
Electronic, thermal (operating
current: 2.8 to 10 A)
Can be parametrised
(s. description P.BE-CPX-AX...)
Yes
Max. 30 V
– Electrical isolation
– Between channel and
24 V
OUT
– Between the channels
Yes (release electrical isolation by
using the internal actuator supply)
No