Festo CPA-SC Series, Manual

Page: 49 / 140

2. Fitting
2−9
Festo P.BE−CPASC−EN en 0808c
2.2.2 Wall mounting
The various base blocks have 4 holes for fitting the terminal
onto a wall (see Fig.2/3).
Fitting Proceed as follows:
1. Make sure that the fastening surface can support the
CPA−SC valve terminal (weights see appendix A, Tab.A/3).
Make sure there is sufficient space for connecting the supply
cables and tubing.
2. Drill mounting holes in the fastening surface.
1
Holes
dia. 3.6 mm
1 1
Fig.2/3: Position of the mounting holes
3. Fasten the CPA−SC valve terminal to the fastening surface
with four M3 screws of sufficient length (tightening torque
1 Nm).