Festo CPA..-ASI... 0208a English
13
3
Addressing
3.1 Assign the AS-Interface slave address
We recommend the use of the Festo addresser type ASI-
PRG-ADR with adapter cable type KASI-ADR.
Before connecting an AS-Interface slave to the bus, assign
a non-reserved AS-Interface address to each AS-Interface
slave. Set the desired address with the AS-Interface ad-
dresser. Permitted range 1...31.
–
The factory setting of the terminal is address 00
–
ID/ IO code see type plate or technical specifications
–
It is not necessary to parametrize the AS-Interface
slaves.
3.2 Output assignment of the valve coils
Examples: Fitting valve locations
2 double-solenoid
valves (Sub-base
block EV2)
4 single-solenoid valves
(Sub-base block EV1)
1 double-solenoid
valve (EV2), 2 single-
solenoid valves (EV1)
2 1 4 3
1 2 3 4
1
2
3 4
