CMMOST-...-DION/DIOP
22
Festo – GDPC-CMMOST-EA-S1-Z6 – 2017-05d – English
Target group
This documentation is intended exclusively for technicians trained in control and automation techno
logy, who have experience in installation, commissioning, programming and diagnostics of positioning
systems.
Service
Please consult your regional Festo contact if you have any technical problems.
Documentation
This document only describes the utilisation of the safety function STO – “Safe Torque Off ” in accord
ance with EN 61800-5-2, as implemented in the motor controller CMMO-ST-C5-1-DIOP/DION. The full
description of the motor controller includes the following documents:
Designation
Contents
Brief description
Brief equipment and functional description of the motor controller for
initial information.
Manual
GDCP-CMMO-ST-EA-SY-...
Equipment and functional description of the motor controller for all
product variants:
– Mounting
– Commissioning via web server/Festo Configuration Tool (FCT)
– Communication via I/O interface
– Technical data
Help system for the FCT
software
Descriptions of the Festo Configuration Tool (FCT) for commissioning
and parameterisation of:
– Configurable axis/motor combinations
– Positioning systems in Festo's Optimised Motion Series (OMS)
Description
GDCP-CMMO-ST-EA-S1-...
Use of the STO safety function (“Safe Torque Off ”).
Parameter lists
List with standard settings of the parameter files for positioning
systems in Festo's Optimised Motion Series (OMS).
Special documentation
CMMO-ST_SPUL
Requirements for operating the product in the USA and Canada in
accordance with certification by Underwriters Laboratories Inc. (UL).
1)
The documentation is enclosed in printed format.
Tab. 1
Documentation on the CMMO-ST
Additional information about the product:
– Brief documentation (quick start guide) for initial start-up and diagnostics of position
ing systems in Festo's Optimised Motion Series (OMS) with the web server of the
CMMO-ST
– Overview of accessories (catalogue)
è
www.festo.com/catalogue
– Operating instructions for configurable actuators and the positioning systems from
Festo (e.g. EPCO)
è
www.festo.com/sp
– Function elements for Codesys
è
www.festo.com/sp
– Certificates, declaration of conformity
è
www.festo.com/sp
