Festo ADN-100-KP, Operating Instructions Manual

Page: 26 / 88

KP/KPE/ADN−...−KP/DNC−...−KP/DS NU−...−KP
Festo KP/KPE/ADN−...−KP/DNC−...−KP/DSNU−...−KP 0703d
English
26
6 O per a tion
N ote
S
Note that the clamping rod can only be moved if the clamping cartridge is
pressurized or if the screw in compressed air connection
2
is screwed in.
N ote
Transverse loadings due to non−aligned guides lead to increased wear.
S
Make sure that the piston rod is only loaded in the direction of movement.
S
Use a flexo coupling ( è Accessories) in order to avoid transverse forces.
C l am pin g the piston rod whilst moving:
1. Pressurize the compressed air connection of the park position on the cylinder.
2. Exhaust the clamping cartridge and then the cylinder.
Movin g out of a clamped parking position:
K P/ K P E ADN −...− K P/ DNC −...− K P/ DSNU −...− K P
1. Pressurize connection
2
on the clamp
ing cartridge with 3 to max. 10bar.
1. Pressurize the piston of the cylinder on
both sides.
2. Move the clamping rod into the desired
position.
2. Pressurize connection
2
of the
clamping cartridge with 3 to
max. 10bar.
3.
Switch the directional flow control
valve for controlling the cylinder
with clamping unit.
Fig.18
S
Protect the clamping rod against dirt.
Oil and grease deposits on the clamping rod will reduce the ability to clamp.