Festo ADN-100-KP, Operating Instructions Manual

Page: 22 / 88

KP/KPE/ADN−...−KP/DNC−...−KP/DS NU−...−KP
Festo KP/KPE/ADN−...−KP/DNC−...−KP/DSNU−...−KP 0703d
English
22
Fitting the c l am pin g ca rtri dg e type K P :
1. Push the clamping cartridge from above
into the support hole of the housing.
2. Push the clamping rod through the hous
ing and the clamping cartridge.
Fastening the c l am pin g u nit type K P E :
S
Push the clamping rod into the clamping
unit.
S
Place the clamping unit in the intended
position.
The KPE clamping unit has through holes
and fastening threads.
Fastening the c ylin d er w ith c l am pin g u nit
ADN −...− K P/ DNC −...− K P/ DSNU −...− K P :
S
Fit the cylinder with the clamping unit on
the front or via supports.
Fastening elements for different cylinders with
clamping unit can be found in the Festo acces
sories (
è Catalogue specifications).
S
Make sure there is sufficient space for the pneumatic connections.
Fig.11
Fig.12
Fig.13