Distributing Pro Station
© Festo Didactic
8117962
47
CAUTION
•
Setting up the pneumatic circuit
–
Connect the devices with plastic tubing with an outside diameter of 4 or 6 mm.
–
Push the pneumatic tubing into the push-in connector as far as it will go.
•
Dismantling the pneumatic circuit
–
Switch off the compressed air supply before dismantling the circuit.
–
Press the blue release ring down so that the pneumatic tubing can be pulled
out.
•
Noise due to escaping compressed air
–
Noise caused by escaping compressed air may damage your hearing.
Reduce noise by using pneumatic mufflers, or wear hearing protection if noise
cannot be avoided.
–
All of the exhaust ports of the components included in the equipment sets are
equipped with mufflers. Do not remove these mufflers.