CLR−...
Festo CLR−... 0312NH English
31
10
Dismantling and repairs
For all dismantling and repair work:
S
Exhaust the CLR−... .
Removing the clamping finger
1. Fasten the clamping finger with the
head of the screw upwards in a vice.
2. Unscrew the fastening screw one turn
out of the clamping finger.
3. Fasten the clamping finger turned
180° in the vice as shown in Fig. 25.
4. Turn the piston rod at spanner flat
6
with a spanner. The piston rod will then
be released from the clamping finger.
An alternative is an extractor device
(e.g. if it is not possible to dismantle
the CLR−...).
S
Order the wearing parts as specified.
S
Always send defective articles to Festo.
S
Make sure that the CLR−... is overhauled only by our repair service.
The repair procedures require settings with very accurate adjustments.
Explain the fault and the conditions of use in an accompanying letter.
Fig.24
Fig.25
Summary of Contents for 535431
Page 99: ...CLR Festo CLR 0312NH 99...
