background image

IFMOS80

E) USING THE CHRONOGRAPH

This chronograph is able to measure and display time in 1/20 second timing up to maxinum of 11 hours 59 minutes 59 

seconds 95.

Measuring time with the chronograph

1.  Press button “B” to change the watch to the chroonograph mode.
The small second hand stops at zero position, and changes to the chronograph 1/20 second hand.
2.  The chronograph can be started and stopped each time button “A” is pressed. 
The chronograph 1/20 second hand stops at zero position 30 seconds after starting.
When button “A” is pressed to stop the chronograph, the chronograph 1/20 second hand advances rapidly to display the 

measured time.
3.  Pressing button “B” resets the chronograph and all chronograph hands return to zero positio

F) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)

This procedure shoud be performed when the chronograph second hand and the chronograph 1/20 second hand do not 

return to zero position after the chronograph has been reset, and including after the battery has been replaced.
1.  Pull the crown out to the 2nd position.
2.  Press button “A” to set the chronograph second hand to zero position
3.  Press button “B” to set the chronograph 1/20 second hand to zero position.

The chronograph hand can be advanced rapidly by continuously pressing button “A” or “B”.

4.  Once the hand have been zeroed, return the crown to the normal position. 
5.  Press button “B” to check that the chronograph hands are reset to zero position.
* Do not push the crown to the normal position while the chronograph second hand and the chronograph 1/20 second hand 

return to zero postion. Each hands stop on the way when crown are returned to normal position and these positions are 

recognized as zero position.

"A"

RESET

"A"

TIME MEASUREMENT

STOP

"B "

"A"

"B"

ENGLISH

   

I

   INSTRUCTION MANUAL

By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making 

products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other 

authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and 

protecting our health. 

Summary of Contents for IFMOS80
















Reviews: