background image

IFM6W70

IFM6W70

24

25

12. USE OF THE ROTATING BEZEL

Some watches are not equipped with a bezel, depending on the model.

1. 

Tachymeter (non-rotating bezel type).

2. 

Directional (rotating bezel type).

If  your  watch  is  provided  with  a  tachymeter:  The 
tachymeter  is  a  feature  that  measures  the  speed  of 
an  automobile.  Measuring  how  many  seconds  a  car 
travels over a distance of 1km enables the tacymeter 
scale  to  show  the  approximate  average  speed  per 
hour during a journey (if this 1km is covered within a 
maximum of 60 seconds.) If the chronograph is started 
at  the  beginning  of  the  distance  measurement,  and 
stopped after 1km, the average speed per hour can be 
determined by the position of the chronograph second 
hand.  If  1km  is  covered  in  45  seconds,  the  average 
speed will be about 80km/h.

1. 

Tachymeter

If your watch is provided with a compass bezel: 
The compass feature on this watch isbased on the 
position of the sun. This compass should only be 
used as an approximate direction finder. Changes 
in  latitude  and  the  seasons  may  also  cause 
directional misreadings. 

One  of  the  feaures  of  this  watch  is  a  directional 
rotating bezel for use in the Northern Hemisphere. 
By aligning the hour hand with the position of the 
sun  in  the  sky,  the  point  halfway  between  this 
position and 12

O’  clock  will  be  South.  Align  the  ‘’S’’  mark  on 
the  rotating  bezel  with  this  halfway  point  to 
determine all other points of the compass.

2. 

Directional rotating bezel (Northern hemisphere)

Summary of Contents for IFM6W70


















Reviews: