IFM6W70
IFM6W70
20
21
10. SETTING LOCAL TIME [L-TM]
[Measuring Procedure]
1.
The timer is started and stopped by pressing button
A
. When button
A
is pressed after
the timer is stopped, timer measurement will continue from the time remaining on the
timer when it was stopped.
2.
Pressing button
C
, when the timer is stopped, returns the timer to the set time.
When button
C
is pressed during timer measurement, the timer returns to the set time
and restarts (timer flyback (restart) function).
A confirmation beep will sound when each of the timer start, stop, reset and repeat
operations is selected.
The local time function enables the time in a different time zone to be set separately from
the current time. Local time is set by performing a time difference correction in 1 hour
units based on the current time (time of the TME mode). The minute and second hands
move in coordination with the current time.
[Time Difference Correction]
Press button
M
to switch to the local time mode [L-TM].
1.
Pull button
M
out
.
2.
Press button
B
or
C
to correct the time difference.
3.
Push button
M
in to the normal position.
• Correction can be made one hour at a time in the
clockwise direction each time button
B
is pressed.
• Correction can be made one hour at a time in the
counterclockwise direction each time button
C
is
pressed. Correction can be made rapidly by holding
button
B
or
C
down.
*
The range over which the time difference can be corrected is from +23
hours to -23 hours based on the current time (time of the TME mode).
