IFM6W70
IFM6W70
22
23
11. WHAT DO TO WHEN THE FOLLOWING OCCUR
[The hands do not indicate the correct positions in each mode]
[The watch exhibits an abnormal display or operation]
[After Replacing the Battery]
• The hand base positions may shift after the watch has been subjected to a strong
impact and so forth. When this happens, refer to [3. Before Using] and perform the
“0-Position Correction” procedure.
• In extremely rare situations, the watch may exhibit an abnormal display or erroneous
operation (such as the alarm continuing to sound, or the hands turning continuously)
as a result of being subjected to the effects of static electricity or strong impact and
so forth. When this happens, perform the “All-Reset” procedure while referring to the
following page.
• After the battery has been replaced, always make sure to perform the “All- Reset”
procedure described on the following page. The watch may not run properly if this
operation is not performed.
[All-Reset Procedure]
The all-reset procedure can be performed in any mode.
1.
Pull button
M
out
.
2.
Simultaneously press buttons
A
,
B
and
C
. (The confirmation beep sounds at this
time.)
3.
Return button
M
to the normal position.
*
After performing the all-reset procedure, always make sure to perform the “0-position correction”
procedure while referring to [3. Before Using] before resetting the watch to the correct time.
