fesing SSIF2P15S48100C, Applications Manual

Page: 18 / 56

2. As shown in Figure 5-7, connect the communication line (a standard RJ45 network cable) between
the adjacent batteries.
3. When performing multi-machine parallel communication operation, it need to configure the dialing
address of each battery. The dialing code is in BCD format, and the address 0 is defined as
. The dialing address configuration of each battery is shown in Table 5-1.
According to the number of the battery in parallel, set the dialing address of the corresponding
battery.
Table 5-1: The Dialing Address Configuration of Each Battery
4. Connect the communication line between battery and computer
(1) RS485/CAN
Port Definition
No.
Module
Address
Battery
Module ID
Picture No.
Module
Address
Battery
Module ID
Picture
1 0x01 1 9 0x09 9
2 0x02 2 10 0x0a 10
3 0x03 3 11 0x0b 11
4 0x04 4 12 0x0c 12
5 0x05 5 13 0x0d 13
6 0x06 6 14 0x0e 14
7 0x07 7 15 0x0f 15
8 0x08 8