fesing SSIF2P15S48100C, Applications Manual

Page: 33 / 56

4
3. Limitation of Warranty Scope
This Limited Warranty applies only to FnS Product:
(a) Installed in covered locations including (Australia);
(b) Purchased from FnS Power or authorized distributors
，
dealer or reseller;
(c) Installed by a licensed professional or authorized installer;
(d) The warranty date is calculated from the factory date of FnS Power;
(e) Within the limited warranty period;
(f) Does not cover the cost of installation, removal, shipping or reinstallation;
(g) Does not cover faults in design or installer error such as reverse polarity or misuse of
system wide equipment or inaccurate programming of all ancillary equipment in your system.
Failure to comply with the installation and operating parameters in the Installation Manual will
avoid the Warranty.
4. Warranty Obligations
(1) The liability of FnS Power under this Limited Warranty shall be limited to the repair or
replacement of the FnS Power Product, at FnS Power’s sole discretion. If the FnS Power
Product are found to be defective as a result of any manufacturing defect in materials and
workmanship during the Limited Warranty Period, FnS Power will, at its sole discretion either
(i) repair the FNS Power Product or (ii) replace the FNS Power Product or (iii) Replace the
Product with a similar FnS Power Product.
(2) If a FnS Power Product is replaced, the returned FnS Power Product will become the
property of FnS Power and must be sent to FnS Power free of any third-party ownership
claims.
(3) The Warranty period of any repaired FnS Power Product or its replacement is twelve (12)
months from the date of shipment from FnS Power, or the remaining term of the Limited
Warranty Period, whichever is greater. In any event, the replacement shall not justify the
renewal of the Term of Performance Warranty.
(4) In the event that a replacement Product is no longer available in the market, FnS Power