HARDWARE
1 GENERAL SAFETY INSTR
1.1 Commissioning
Before using this spray gun, some simple assembly is required.
To properly assemble the spray gun, proceed as follows:
1. Screw on the compressed air coupling and tighten it firmly
using a hexagonal wrench.
2. Insert the paint filter, with the filtering part facing
downwards, inside the opening where the tank will be
screwed in, positioned on top of the spray gun.
3. Screw the paint tank into the
the spray gun.
1.2 How to Use the Spray Gun
The minimum operating pressure is 0.2
Adjust the amount of paint and air released from the nozzle
via the three adjustment knobs.
GENERAL SAFETY INSTRUCTIONS
Before using this spray gun, some simple assembly is required.
To properly assemble the spray gun, proceed as follows:
Screw on the compressed air coupling and tighten it firmly
hexagonal wrench.
Insert the paint filter, with the filtering part facing
downwards, inside the opening where the tank will be
screwed in, positioned on top of the spray gun.
Screw the paint tank into the opening positioned on top of
How to Use the Spray Gun
The minimum operating pressure is 0.2 – 0.25 MPa.
Adjust the amount of paint and air released from the nozzle
via the three adjustment knobs.
Figure
Page 3 of 9
Figure 1 - Air inlet
Figure 2 - Tank
Figure 3 – Adjustment knob.
fervi.com
