background image

MACHINES AND

ACCESSORIES

Page 7 of 29

1. Always check the efficiency and integrity of the machine.
2. Before connecting the machine to the mains make sure that the switch is in the rest

position.

3. Do not start the machine in an enclosed or poorly ventilated area, or in the presence of

a flammable and/or explosive atmosphere. Do not use the machine in damp and/or wet

locations, or those exposed to rain or humidity.

4. Before starting the machine, get used to ensuring that no remaining adjustment or

maintenance wrenches have remained inserted.

5. Keep the workplace tidy and free from hindrances; disorder causes accidents.
6. Make sure that the work environment is forbidden to children, non-employees and

animals.

7. Do not perform tasks on the machine other than those for which it was designed. Only

use the machine in the manner in which it was intended, as described in this instruction
manual.

8. Work without disturbances.
9. Work areas must be well lit.
10.Always wear eye protection and protective gloves while working. If dust is produced,

use the appropriate masks.

11.Wear appropriate clothing. Loose clothing, dangling jewellery, long hair, etc.., can get

caught in the moving parts, causing irreparable injury.

12.Replace worn and/or damaged parts, check that the guards and protection devices work

properly before operating. If necessary, have the machine checked by the service

support personnel. Use only original spare parts.

13.

Cut the mains voltage supply to the machine when:

the machine is not being operated;

is left unattended;

you are performing maintenance or adjustment because the machine does not

work properly;

the power cable is damaged;

you are replacing its tool;

in case the machine is being moved to another location;

you are cleaning the machine.

14.Do not use the machine in areas with a risk of fire and / or explosion.
15.It is recommended that users of this publication, for maintenance and repair, have a

basic knowledge of mechanical principles and of repair technique procedures.

16.To stop the machine, always and only use the stop command (red button).

17.Do not leave the machine until the motor has completely stopped.
18.

Management in charge of safety is to make sure that the staff responsible for
using the machine has read and understood this manual in its entirety.

19.

The company safety manager is responsible for monitoring the company's risk
status according to Legislative Decree no. 81/08.

fervi.com

Summary of Contents for 0759






























Reviews: