MACHINES AND
ACCESSORIES
Page 5 of 15
2 GENERAL SAFETY WARNINGS
Risks associated with using the instrument
Each person in charge of the installation, use and maintenance of this halogen lamp, must
carefully read this manual, and in particular this chapter with information about safety, in
order to acquire full knowledge of the device.
2.1 Precautions with regard to electric shocks
Risks associated with electric shocks
Check that the switch is in the "0" position and that the power supply plug is
disconnected before touching live parts of the appliance.
Touching these parts without disconnecting the power supply plug may cause an
electric shock.
Make sure that the power supply used meets the requirements for voltage and
frequency required by the device (shown on the plate).
The use of different types of power supplies may cause an electric shock, as well as fire
or damage to the device.
DO NOT spray or pour water on the unit, this may cause an electric shock.
If water comes into contact with the unit, unplug the power plug immediately and
contact Technical Support as soon as possible.
Using the device disassembled may cause an electric shock.
Regrading the repair of the equipment contact Technical Support.
2.2 Precautions regarding installation
Risks associated with installation
Attach the unit to a solid and strong support surface: stably and securely attach the
device to the support structure or frame of the machine tool.
Install the unit as described in the instructions for use regarding the position and the
type of fixation.
DO NOT install the unit in locations subject to high and/or low temperatures (this may
damage the halogen lamp).
fervi.com
