MACHINES AND
ACCESSORIES
Page 13 of 15
9 TURNING THE LAMP ON
After you have successfully installed the device, turn on the
lamp by moving the switch, located on the handle on top of the
cover, in position "I". At the end of the work, turn off the lamp
by putting the switch into the “0” position.
Figure 7 – Close-up of the
switch.
10 MAINTENANCE AND CLEANING
The purpose of this chapter is to provide all the information on maintenance procedures and
their frequency as required by the
Halogen lamp for machine tools
.
INTERVENTION
Frequency
Daily
Weekly
Monthly
1. General visual inspection
X
2. Check that plates are clearly visible and
legible
X
3. General cleaning
X
4. Replacing fluorescent tube
If necessary
1.
General visual inspection:
Check the overall status of the device, particularly the
flexible power supply cable and signs of any damage or missing parts.
2.
Check that plates are clearly visible and legible:
the plate on the device must be
perfectly visible and legible. It is therefore necessary to keep it clean and ask for a
replacement if it is illegible.
3.
General cleaning:
cleaning is necessary to free the structure, the cap and the
magnifying lens of dust or dirt.
Risks associated with cleaning
Plastic materials are used in some parts of the lamp. Applying organic solvents (such as
benzene), or other chemicals for cleaning may cause deformation or discolouration.
Clean the device gently, using a soft dry cloth.
fervi.com
