Ferroli SALERNO PELLET, Assembly And Exploitation Manual, Page: 4 / 20

4
2. TECHNICAL DATA
3. ASSEMBLY
3.1 General conditions.
For ensuring the proper and safe work of the stove the observation of the following prescriptions
is required:
The assembly of the stove and the related equipment must be performed by authorized personnel
only.
The foundation upon which the stove is going to be placed must be even and horizontal, made
out of non-flammable materials with a dimension of at least 40 cm. in front of the stove and not
less than 20 cm from both sides and the rear side.
If flammable materials or constructions are present, the distance between them and the stove
must be at least 80 cm.
When assembling the stove make sure that the joints between the separate pipes and the chimney
socket are well insulated.
A smell on first start-up of the stove is due to the burning of the paint.
The stove is painted with thermal resistant paint which reaches its final resistance after a couple
start-ups and warm ups. THAT IS WHY THE OUTER SURFACES MUST NOT BE TOUCHED
in order to avoid damage to the casing.
The periodic cleaning of the ash tray must be done only when the stove is cold.
SALERNO PELLET
Maximum / minimum power kW 12,00 / 3,90 18,00 / 6,00 24,00 / 7,50 30,00 / 14,00
Average consumption of pellets kg/h 1,6 2,4 3,2 3,9
Efficiency (nominal / reduced) % 95 / 95 94 / 95 94 / 95 93 / 93
Temperature of the flue gas ºC 91 / 79 129 / 79 131 / 82 108 / 93
Co Emissions 13% O mg/Nm³ 128 96 97 262
The chimney draft Pa 12 12 12 12
Exhaust gas pipe
Φ mm 80 80 80 80
Electrical consumption
min/max 350/60 350/60 350/60 350/60
Electrical supply
V/Hz 230 / 50 230 / 50 230 / 50 230 / 50
Minimum safety distances
mm
Back - 350
Sides - 200
Front - 800
Back - 350
Sides - 200
Front - 800
Back - 350
Sides - 200
Front - 800
Back - 350
Sides - 200
Front - 800
Fuel type
Pellets Φ6 - Φ8 Pellets Φ6 - Φ8 Pellets Φ6 - Φ8 Pellets Φ6 - Φ8
Capacity expansion vessel
litri 5 8 8 8
Flow connection (outer thread) “ 1 1 1 1
Return connection (internal thread)
“ 1 1 1 1
Working at environment temperature
ºC 5 - 40 5 - 40 5 - 40 5 - 40
Max. water temperature
ºC 90 90 90 90
Humidity at 30 O C environment
temperature
% 85 85 85 85
Water jacket capacity
litri 26 31 31 41
Working pressure
Bar 2 2 2 2
Height H (max)
mm 1047 1127 1127 1177
Width W (max) mm 534 584 584 624
Depth D (max)
mm 631 631 631 672
Pellet bunker volume kg 20 30 30 30
Weight
kg 165 175 175 192
Heated area
m³ 250 (max.) 350 (max.) 500 (max.) 600 (max.)