Ferroli Domina 80 E Installation, Service And User Instructions Manual Download Page 2 | Manualshive

Page: 2 / 68

background image

DOMINA 80 E

2

INDEX

1.0

DESCRIPTION .................................................................................................................... 3

2.0

TECHNICAL AND DIMENSIONAL CHARACTERISTICS ................................................... 4

3.0

INSTALLATION DETAILS .................................................................................................. 11

4.0

COMMISSIONING AND TESTING .................................................................................. 39

5.0

ADJUSTMENT AND GAS CONVERSION ........................................................................ 41

6.0

MAINTENANCE AND CLEANING .................................................................................. 44

7.0

REPLACEMENT OF PARTS .............................................................................................. 46

8.0

FAULT FINDING ............................................................................................................... 52

9.0

ELECTRICAL AND FUNCTIONAL SCHEME .................................................................... 61

10.

USER INSTRUCTIONS ...................................................................................................... 64

CE MARK

CE mark documents that the Ferroli gas appliances comply with the requirement contained in
European directives applicable to them.
In particular, the appliances comply with the following CEE directives and the technical
specifications provided from them:
•

Gas appliances directive 90/396

•

Efficiencies directive 92/42

•

Low tension directive 73/23 (modified from the 93/68)

•

Electromagnetic compatibility directive 89/396 (modified from the 93/68)

Year 2000 Compliance Declaration

We will guarantee that this products is altogether suitable for the data change in the Year 2000
(boiler has no dependence from date change) and that no disruptions will occur which is caused
by this product.

IMPORTANT

From the 1st October 1999 your "benchmark" Installation, Commissioning and Service
Record Log Book will be enclosed in your customer information pack.
"This record must be completed and left with the end user"

Ferroli is a member of the Benchmark initiative and fully supports the aims of the programme.
Benchmark has been introduced to improve the standards of installation and commissioning of
central heating systems in the UK and to encourage the regular servicing of all central heating
systems to ensure safety and efficiency.

«
1
2
3
4
...
»

Summary of Contents for Domina 80 E





































































Reviews:

No comments

Related manuals for Domina 80 E

Brand: Raypak Pages: 76

LOGIC HEAT2 H12

Brand: Ideal Heating Pages: 8

LOGIC COMBI2 C24

Brand: Ideal Heating Pages: 10

ecoTEC plus SERIES

Brand: Vaillant Pages: 32

uniSTOR VIH GB 3 BES Series

Brand: Vaillant Pages: 24

ecoTEC plus SERIES

Brand: Vaillant Pages: 52

ecoTEC plus SERIES

Brand: Vaillant Pages: 56

Brand: Vaillant Pages: 16

Brand: Vaillant Pages: 64

Brand: Vaillant Pages: 83

Aerco Modulex EXT Series

Brand: Watts Pages: 144

TURBOmax Plus SERIES

Brand: Vaillant Pages: 12

Brand: Radiant Pages: 72

ecoTEC plus 938

Brand: Vaillant Pages: 72

Brand: CleaverBrooks Pages: 314

Brand: Velocity Pages: 160

Brand: A.O. Smith Pages: 12

Brand: Buderus Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands