background image

Thank you

 for purchasing this quality-built FERRIS product.  We’re pleased that you’ve placed your confidence 

in the FERRIS brand.  When operated and maintained according to the instructions in this manual, your FERRIS 
product will provide many years of dependable service.

This manual contains 

safety information to make you aware of the hazards and risks associated with this machine 

and how to avoid them.  This machine is designed and intended to be used and maintained according to the manual 
and operated by trained professionals for finish cutting of established lawns and is not intended for any other 
purpose.  It is important that you read and understand these instructions thoroughly before attempting to start or 
operate this equipment.  

Save these original instructions for future reference.

See FEATURES AND CONTROLS for the location of 
Identification Numbers

PRODUCT REFERENCE DATA

Unit Model Number

Unit SERIAL Number

Mower Deck Model Number

Mower Deck SERIAL Number

Dealer Name

Date Purchased

ENGINE REFERENCE DATA

Engine Make

Engine Model

Engine Type/Spec.

Engine Code/Serial Number

WARNING

Engine exhaust from this product contains 
chemicals known to the State of California to 
cause cancer, birth defects, or other reproductive 
harm.

WARNING

Battery posts, terminals, and related accessories 
contain lead and lead compounds — chemicals 
know to the State of California to cause cancer or 
reproductive harm.  Wash hands after handling.

Briggs & Stratton Power Products Group, LLC. 
Copyright © 2012 Briggs & Stratton Corporation  
Milwaukee, WI, USA.  All rights reserved.

FERRIS is a trademark of Briggs & Stratton Corporation 
Milwaukee, WI, USA.

Contact Information:

Briggs & Stratton Power Products Group, LLC.
5375 N. Main St.
Munnsville, NY 13409-4003
(800) 933-6175
www.ferrisindustries.com 

When contacting your authorized dealer for 
replacement parts, service, or information you MUST 
have these numbers.

Record your part number, serial number and engine 
serial numbers in the space provided for easy access.  
These numbers can be found in the locations shown.

NOTE: For location of engine identification numbers, 
refer to the engine owner’s manual.

Not 

for  

Reproduction

Summary of Contents for IS2000Z Diesel

















































Reviews: