16
Regular Maintenance
LUBRICATION
Lubricate the machine at the lubrication points shown in
Figures 6 - 11.
Use grease fittings when present. Disassemble parts to
apply grease to moving parts when grease fittings are
not installed.
Not all greases are compatible. Ferris Red Grease
(P/N 22285) is strongly recommended. Automotive-type
high-temperature, lithium grease may be used when this
is not available.
Generally, all moving metal parts should be oiled where
contact is made with other parts. Keep oil and grease
off belts and pulleys. Remember to wipe fittings and
surfaces clean both before and after lubrication.
Figure 8.
Blade Spindles
Figure 9.
Caster Tire Pivots & Axles
Figure 10. Steering Lever Pivots & Operator
Presence Pivots
Figure 11. Parking Brake Lever Pivot & Link Pivot
Figure 6.
Motion Control Pivot & Rod Pivot
Figure 7.
Lower Motion Control Pivots & Neutral
Return Pedal Pivot
