background image

LC-8

Common International Symbols

Technical Manuals

Additional Technical Literature Available

Operators Manuals

Additional copies of this manual are available, (and as part of
our product support commitment, we maintain a stock of
printed operators manuals going back many years!)

Parts Manuals

Fully illustrated parts manuals are also available —
these manuals show all of the product’s components in
exploded views (“3D” illustrations which show the relationship of
the parts and how they go together), as well as giving the replace-
ment part numbers and quantities used. Important assembly notes and
special torque values are included in these manuals.

For the applicable manuals currently available for
your model, contact your local dealer.  Have the
information listed in the box at the right available
when making your request.

Model:

Serial No.:

Your Name:

Address:

City, State, Zip:

Visa/Mastercard No.:

Card Expiration Date:

Choke

Fast (Throttle)

Slow (Throttle)

Throttle 

Fuel

PTO Clutch

Parking Brake

Brake

Headlights

Mower Cutting
Height Adjustment

Summary of Contents for HydroWalk DDS48













































Reviews: