Not for
Reproduction
11
Inspection and Maintenance of the Roll Bar
Seat Belt
WARNING
Failure to properly inspect and maintain the seat belt can
cause serious injury or death.
4
• The seat belt like the ROLL BAR, needs to be
periodically inspected to verify that the integrity has not
been compromised through normal machine use, misuse,
age degradation, modifications, or a roll over. If the seat
belt does not pass all of the following tests, it should be
replaced.
• BEFORE EACH USE – Conduct the following
inspections/maintenance of the seat belt and retraction
mechanism:
1) Check for dirt or debris in the retraction mechanism. If
dirt or debris is found, it should be removed.
2) Check to make sure the retraction mechanism retracts
easily and completely.
3) Check for damage to any part of the seat belt (A,
Figure 4) such as nicks, cuts, loose stitching, or fraying.
4) Check that the buckle and latch (B) operate properly
and that the latch plate is not excessively worn,
deformed, or the buckle is damaged or cracked. The seat
belt should latch and release easily.
Safety Decals
Before operating your unit, read the safety decals. The
cautions and warnings are for your safety. To avoid a
personal injury or damage to the unit, understand and follow
all safety decals.
WARNING
If any safety decals become worn or damaged, and
cannot be read, order replacement decals from your
local dealer.
5
*Located near the transmission fans.
**Located on the front of the Roll Bar pockets on the frame of
the unit.
A
Part No.: 5106565 - Decal, Main Safety
B
Part No.: 5061246 - Decal, Pinch Point, CE
C
Part No.: 5102456 - Decal, Fire, ANSI Export
D
Battery Safety Decal
E
Part No.: 7106109 - Decal, Discharge Safety, Euro RER
