background image

Thank you

 for purchasing Ferris commercial mowing equipment.  Please take a few minutes to read this limited warranty information.  It contains all 

the information you will need to have your Ferris mower repaired in the unlikely event that a breakdown covered by this limited warranty should occur.  

Owner’s Responsibilities

 - As a condition to our obligations under this limited warranty, you shall have read the operator’s manual and you shall 

have completed and submitted to Ferris, within 20 days from the date of purchase, the Ferris Product Registration.  You must properly service and 
maintain your Ferris product as described in the operator’s manual.  Such routine maintenance, whether performed by a dealer or by you, is at your 
expense. The Ferris equipment, including any defective part covered by this limited warranty, must be returned to an authorized Ferris dealer within 
the warranty period for warranty service.  This limited warranty extends only to equipment operated under normal conditions and in accordance with 
Ferris’ instructions. 

Warranty Start Date

 - The limited warranty coverage begins on the day you buy your new Ferris commercial mowing equipment.  An authorized Ferris 

dealer will assist you in filling out a Ferris Product Registration with specific information for the model you purchase and your personal information, 
which must be returned to Ferris.   

Limited Warranty

 - The limited warranty, set forth below, is a written guarantee by Ferris, during the warranty period, to repair or replace parts which 

have a substantial defect in materials or workmanship.  The warranty is “limited” because it is for a specified period of time, applies to the original pur-
chaser only, and is subject to other restrictions. 

FERRIS LIMITED WARRANTY

Ferris Industries (Ferris) warrants, in accordance with the provisions below, to the original purchaser only, for the periods described below that the 
commercial mower shall be free from substantial defects in material or workmanship under normal use and service.  If you wish to file a claim under 
this limited warranty, you must provide prompt notice of your claim to an authorized Ferris dealer during the warranty period.  Ferris’ obligation under 
this limited warranty is, at Ferris’ option, to repair or replace any part or parts of the mower, which, in the judgment of Ferris, are found to be defective 
and covered by this limited warranty.  An authorized Ferris dealer will repair or replace the defective part or parts, at the dealer’s place of business, 
at no charge for the labor or parts.  This limited warranty applies only to mowers sold in the United States and Canada and is subject to the following 
limitations.  

Covered 

Parts 

  Warranty 

Period

All Mowers 

 

 

2-years (24 months) from date of retail purchase by the original

 

 

 

 

purchaser for parts & labor (90 days for rental mowers)

    (Except 

as 

noted 

below*)

*Belts, Tires, Brake Pads 

 

90 days from date of retail purchase by the original purchaser

And Hoses, Battery, Blades

*Attachments 

 

 

1 year from date of retail purchase by the original purchaser

*Engine   

 

 

If the engine manufacturer provides any warranty on the mower’s engine, Ferris will assign that warranty to

  

 

 

 

the original purchaser of the mower if such assignment is reasonably practicable.  Please refer to the engine 

 

 

 

 

manufacturer’s warranty statement, if any, that is included in the owner’s packet.  We are not authorized to

 

 

 

 

handle warranty adjustments or repairs on engines.  Ferris offers 

NO WARRANTY

 on mower engines.  Ferris

 

 

 

 

does not guarantee or represent that any engine manufacturer will comply with the terms of its warranty.

Items and Conditions Not Covered

This warranty does not cover, and Ferris makes 

NO WARRANTY

 regarding, the following:

  •  Mowers or their parts if a complete and accurate Ferris Product Registration has not been received by Ferris.
  •  Loss or damage to person or property other than that expressly covered by the terms of this limited warranty. 
  •  Pickup and delivery charges and risk of loss or damage in transit to and from any authorized Ferris dealer.
  •  Any damage or deterioration due to normal use, wear and tear, or environmental or natural elements, or exposure.
  •  Cost of regular maintenance service or parts, such as but not limited to, filters, fuel, lubricants, tune-up parts, and adjustments.
  •  Claims arising due to failure to follow Ferris’ written instructions, or improper storage or maintenance.
  •  Any repairs necessary due to use of parts, accessories or supplies, including gasoline, oil or lubricants, incompatible with the mowing equipment, 

or other than as recommended in the operator’s manual or other written operational instructions provided by Ferris.  

  •  Use of non-Ferris approved parts or accessories.
  •  Any overtime or other extraordinary repair charges or charges relating to repairs or replacements.
  •  Rental of like or similar replacement equipment during the period of any warranty, repair or replacement work.
  •  Loss of revenue, time or use of the mowing equipment.
  •  Travel, telephone or other communication charges.
  •  Damage from continued use of defective mowing equipment.
  •  Freight charges on replacement parts.
  •  Any mowing equipment or part which, in the judgment of Ferris, has been altered or tampered with in any way or has been subjected to misuse, 

abuse, abnormal usage, unauthorized repair, neglect or accident, damage in transit, or has had the serial numbers altered, effaced or removed.

  •  Any equipment, part or item not mentioned under “Covered Parts,” above.

General Conditions

Ferris is continually striving to improve its products, and therefore reserves the right to make improvements or changes without incurring any obliga-
tion to make changes or additions to products sold previously.  Any oral or written description of Ferris products is for the sole purpose of identifying 
the products and shall not be construed as an express warranty.  No warranty claim shall give rise to a right for the purchaser to cancel or rescind any 
sale.  No person is authorized to make any warranty or assume for Ferris any liability not strictly in accordance with this limited warranty.  Any assis-
tance Ferris provides to or procures for the purchaser outside the terms, limitations or exclusions of this limited warranty will not constitute a waiver of 
the terms, limitations or exclusions of this limited warranty, nor will such assistance extend or revive the limited warranty.  Ferris will not reimburse the 
purchaser for any expenses incurred by the purchaser in repairing, correcting or replacing any defective products except for those incurred with Ferris’ 
prior written permission and in accordance with this limited warranty.

Ferris’ sole and exclusive liability with respect to this limited warranty, and the purchaser’s exclusive remedy, shall be repair or replacement as set 
forth herein.  All warranty work must be performed by an authorized Ferris dealer using only Ferris approved replacement parts.  

FERRIS SHALL 

HAVE NO LIABILITY FOR ANY OTHER COST, LOSS OR DAMAGE, INCLUDING BUT NOT LIMITED TO, ANY INCIDENTAL, COMPENSATORY, 
INDIRECT, PUNITIVE, SPECIAL OR CONSEQUENTIAL LOSS OR DAMAGE.  FERRIS’ AGGREGATE LIABILITY WITH RESPECT TO A 
DEFECTIVE PRODUCT OR PART SHALL BE LIMITED TO AN AMOUNT EQUAL TO THE MONIES PAID BY THE PURCHASER FOR THAT 
DEFECTIVE PRODUCT OR PART.  THIS LIMITED WARRANTY, AND FERRIS’ OBLIGATIONS HEREUNDER, ARE EXCLUSIVE AND IN LIEU OF 
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY 
AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.  FERRIS SHALL NOT BE LIABLE TO THE PURCHASER, 
OR TO ANYONE CLAIMING UNDER THE PURCHASER, FOR ANY OTHER OBLIGATIONS OR LIABILITIES, INCLUDING, BUT NOT LIMITED 
TO, OBLIGATIONS OR LIABILITIES ARISING OUT OF BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE OR OTHER TORT OR ANY 
THEORY OF STRICT LIABILITY, WITH RESPECT TO FERRIS PRODUCTS OR FERRIS’ ACTS OR OMISSIONS OR OTHERWISE.  

It is the express wish of the parties that this agreement and any related documents be drafted in English.  Il est la volonté expresse des parties que 
cette convention et tous les documents s’y rattachent soient rédigés en anglais.

Ferris Industries - a division of Briggs & Stratton Power Products Group, LLC.

Owner’s Limited Warranty Information

(Effective 04/28/2004)

Not 

for  

Reproduction

Summary of Contents for 5900591

























































Reviews: