background image

2

Operator Safety

Operating Safety

Congratulations on purchasing a superior-quality piece of 
lawn and garden equipment.  Our products are designed and 
manufactured to meet or exceed all industry standards for safety.  

Do not operate this machine unless you have been trained. 
Reading and understanding this operator’s manual is a way to 
train yourself.

Power equipment is only as safe as the operator.  If it is misused, 
or not properly maintained, it can be dangerous!  Remember, you 
are responsible for your safety and that of those around you.  

Use common sense, and think through what you are doing.  If 
you are not sure that the task you are about to perform can be 
safely done with the equipment you have chosen, ask a   
professional: contact your local authorized dealer.

Read the Manual

The operator’s manual contains important safety 
information you need to be aware of BEFORE you 
operate your unit as well as DURING operation.  

Safe operating techniques, an explanation of the 
product’s features and controls, and maintenance 
information is included to help you get the most out of 
your equipment investment.  

Be sure to completely read the Safety Rules and 
Information found on the following pages.  Also 
completely read the Operation section.

Children

Tragic accidents can occur with children.  Do 
not allow them anywhere near the area of 
operation.  Children are often attracted to the 
unit and mowing activity.  Never assume that 
children will remain where you last saw them.  
If there is a risk that children may enter the 
area where you are mowing, have another 
responsible adult watch them.

Not 

for  

Reproduction

Summary of Contents for 5900591

























































Reviews: