54
ZMLE
Rev. 2.0
TRANSPORT AND INSTALLATION
4.14
7
1
4
1
5
3
5
6
2
1
04-Aggancio (T
rinciatrici)
4.3.1 Attaching without a Quick Hitch
1)
Move the 2 tractor hydraulic lifting device arms (
1
) towards the attachments of the machine so that (
2
) they
overlap.
2)
Insert the lifting device arms into the attachments (
2
) and lock them with the safety (
3
) pins.
3)
Fit the third point stabiliser (
4
). Raise the machine and adjust until the third point arc (
7
) is perpendicular to the
ground. Tighten the 2 arms (
1
) of the lifting device using the respective stabilisers (
5
) and position the machine
in a central position.
4)
Ensure that the locks, in their respective assemble pins, are blocked.
5)
Raise the support foot (
6
) (only if present).
6)
Connect the hydraulic ram control pipes to the tractor, ensuring to not invert them during assembly.
4.3.2 Attaching with a Quick Hitch
1)
Adjust the height of the tractor’s hydraulic lifting device arms so that the lifting hooks are lower than the
attachment pins on the machine.
2)
Ensure that the 3 attachment pins are correctly assembled.
3)
Align the tractor’s hydraulic lifting device hooks reversing slowly.
4)
When the lifting device’s quick hitch is positioned under the machine’s 3-point coupling pins, slowly raise the
tractor’s hydraulic lifting device. Ensure that the tractor’s hydraulic lifting quick hitches are completely inserted
inside the machine’s 3-point coupling pins.
5)
Block the hydraulic lifting device hook lock.
6)
Connect the hydraulic ram control pipes to the tractor, ensuring to not invert them during assembly.
Insert and lock the safety pins into the pin hole and make sure that they are locked in
place. Also lock the third point coupling anti-unscrew device.
CAUTION
Do not operate with the flail head leaning towards the back or front part to not compromise
the efficiency of the accident prevention devices fitted on the machine.
Ensure that the flail head is parallel to the ground during operation.
DANGER
Summary of Contents for ZMLE Series
