Sanding curved surfaces
15
19
- Hold the workpiece firmly and sand it in the area of the position shown by
pressing it evenly against the sanding belt
19
and moving it gently back and
forth.
Cleaning
WARNING!
Risk of electric shock!
Improper handling of the device can cause electric shock.
- Always switch off the device and pull the mains plug out of
the socket before cleaning the device.
NOTE!
Risk of short circuit!
If water or other liquids enter the housing, they can cause a short
circuit.
- Never immerse the device in water or other liquids.
- Make sure that no water or other liquid gets inside the
housing.
- Use a soft cloth or brush to clean the housing.
- Remove dust or chips by blowing with compressed air.
Operation
24
