19
29
19
1. Turn the tracking knob
29
1/4 of a revolution clockwise if the sanding belt
moves towards the sanding disc
17
.
2. Turn the tracking knob 1/4 of a revolution anticlockwise if the sanding belt
moves away from the sanding disc.
3. Then switch on the device and check whether tracking of the sanding belt is
correct.
4. Follow these steps to adjust belt tracking as needed.
Testing
Regularly inspect the device and its accessories to ensure that they are in fault-free
condition and
- the controls for damage.
- that the accessories are in perfect condition.
- that the vents are open and clean.
Do not operate a damaged device or accessory. Have the damaged device or
accessory checked and repaired by an authorised service centre.
Storage
NOTE!
Risk of damage!
Improper storage of the device can result in damage.
- Allow the device to completely cool down.
- Place the device so that it can’t fall into water.
Maintenance
27
