background image

11

Introduction

I. Introduction

Congratulations on choosing to buy a FERREX

®

 product.

All products brought to you by FERREX

®

 are manufactured to the highest standards of per-

formance and safety, and as part of our philosophy of customer service and satisfaction, are 
backed by our comprehensive 

3 Year Warranty.

We hope you will enjoy using your purchase for many years to come.
Note:
According to the applicable product liability law the manufacturer of this machine is not liable 
for damages which arise on or in connection with this machine in case of:
•  improper handling,
•  non-compliance with the instructions for use,
•  repairs by third party, non-authorised skilled workers,
•  installation and replacement of non-original spare parts,
•  improper use,
•  failures of the electrical system due to the non-compliance with the electrical specifications 

and the European regulations.

Recommendations:
Read the entire text of the operating instructions prior to the assembly and operation of the 
machine.
These operating instructions are intended to make it easier for you to get familiar with your 
machine and utilise its intended possibilities of use.
The operating instructions contain important notes on how to work safely, properly and eco-
nomically with your machine and how to avoid dangers, save repair costs, reduce downtime, 
and increase the reliability and working life of the machine.
In addition to the safety regulations contained herein, you must in any case comply with the 
applicable regulations of your country with respect to the operation of the  machine.
Put the operating instructions in a clear plastic folder to protect them from dirt and humidity, 
and store them near the machine. The instructions must be read and carefully observed by 
each operator prior to starting the work. Only persons who have been trained in the use of 
the machine and have been informed on the related dangers and risks are allowed to use the 
machine. The required minimum age of 16 years must be met.
In addition to the safety notes contained in the present operating instructions and the special 
regulations of your country, the generally recognised technical rules for the operation of this 
machine must be observed.

Summary of Contents for 703353



















Reviews: