Ferrari 2006 F430 Spider Owner'S Manual Download Page 56

Page: 56 / 154

Heating System (optional)

The heating is activated by turning control

Two heating pads are used to heat the seat.

When this function is active for one or more

seats, the relative warning light illuminates

on the instrument panel.
Operating control

you can adjust the

heating level, choosing from 3 levels

identifi ed on the control with the numbers

1, 2 and 3.

Interior rearview mirror

Adjusted manually.
To set the mirror in the anti-glare position,

push the lever

forward.

�

Adjusting the headrest

Move the headrest

until the desired

height has been reached. Once the desired

position has been found, the headrest can

also be tilted forward and backward.

Adjust the headrest to suit your

height in such a way that the center

of the headrest is level with the nape of the

neck.

�

Summary of Contents for 2006 F430 Spider



























































































































































Search results

Summary of Contents for 2006 F430 Spider

Reviews:

Related manuals for 2006 F430 Spider

Brands by name

Popular brands

Ferrari 2006 F430 Spider, Owner'S Manual

Search results

Summary of Contents for 2006 F430 Spider

Reviews:

Related manuals for 2006 F430 Spider

Brands by name

Popular brands