manualshive.com logo in svg

Ferno POWERFlexx, User Manual

Share
Download
Ferno POWERFlexx User Manual Download Page 40

40

© Ferno-Washington, Inc.   234-3310-01  May 2005

POWERFlexx

™

Accessories and Related Products

11 - ACCESSORIES AND RELATED PRODUCTS

Ferno offers a full line of accessories (fasteners, IV
poles, immobilizers, blankets, etc.) approved for use
with the cot. Always follow the instructions packed with
accessories. Keep the instructions with this manual. Be
aware of any special considerations (loading heights,
door heights, etc.) when using accessories.

Contact Ferno Customer Relations (page 41) or your
Ferno distributor for product information.

Attaching improper items to the cot can
cause injury. Use only Ferno-approved items
on the cot.

WARNING

!

FERNO-RECOMMENDED DISINFECTANT

Description

Part #

SaniZene

®

 Hard Surface Disinfectant

4 ea., 1 gallon ............................................. 078-9214

COT-MOUNTED ACCESSORIES

Description

Part #

Large Body Surface (LBS) ...........................081-9991
LBS IV pole ..................................................008-7173
LBS mount blocks POWERFlexx (set/6) ....082-1994
LBS mount block POWERFlexx (1 ea) .......082-1995

274 Pac Rac

™

 equipment tray ......................081-9960

513-13 IV pole ..............................................008-7172
514 Oxy-Clip ................................................008-5500

Sidearm cover (1 ea) ....................................082-1953
Sof-Net (drop frame storage) .......................081-9874
Transfer board ..............................................010-7981

POWERFlexx locking mattress ...................031-3997
POWERFlexx power pack module .............. 082-2011
POWERFlexx battery charger ......................082-2014
POWERFlexx battery (1 ea) ........................082-2012
POWERFlexx actuator assembly .................082-2013

TOUCH-UP PAINT

Description

Part #

Rescue red ....................................................... 081-9972
Day-glo green .................................................. 081-9973
Safety orange ................................................... 081-9974
Electric blue ..................................................... 081-9975
Dove gray ........................................................ 081-9976
Black ................................................................ 081-9977

RESTRAINTS

Description

Part #

430 Restraint (2 pc., 7’ black) ......................... 031-3911
430 Restraint (2 pc., 5’ black) ......................... 031-3892
417-1 Shoulder harness (black) ....................... 031-3915
Guide strap for harness restraint (only) ........... 031-3945

Summary of Contents for POWERFlexx













































Reviews:

No comments

Brands by name

Popular brands

Load more brands