background image

 

FernoCare Maintenance & service contracts 

 
As the manufacturer of this equipment, Ferno UK offer a cost-effective servicing 
programme, helping to keep your equipment in good condition and keeping whole life 
time costs to a minimum. 
 

  FernoCare service technicians are dedicated to providing quality equipment service and 

repair 

  To minimise down time, Ferno service vehicles are fully equipped with all replacement 

parts 

  All FernoCare Service Technicians wear official identity badges and uniforms 

  Emergency Call out - Whatever your location, Ferno have field-based Technicians 

located throughout the UK 

 
Service Contracts 
 

  FernoCare provide competitively priced service and inspection contracts 

  We offer a discount if a Ferno Service contract is taken out, you only pay once the 

service has been completed 

  Additional discounts can be offered if a 5-year contract is taken out, with a guarantee to 

hold the price for the effective contract period 

  Pay annually or as the service is completed, helping you to control your costs 

  A service report is provided for each piece of equipment, detailing parts that may have 

required replacement and also its condition 

  These documents provide an audit trail and can be presented with your service schedule 

for equipment inspection purposes 

 
Warranty 

 
Ferno (UK) Ltd. standard terms and conditions apply to all sales. A copy is available 
on request. These contain full details of warranty terms and do not limit the statutory 
rights of the customer. 
 

Contact information 

 
For questions on service, maintenance and any other questions regarding this or any 
other Ferno product, please contact: 
 
Ferno (UK) Limited 
Ferno House 
Stubs Beck Lane 
Cleckheaton 
West Yorkshire 
England 
BD19 4TZ 
 
Telephone Main Reception: +44 (0) 1274 851999 
Telephone Service Dept:     +44 (0) 1274 854511 
Email Service Dept: 

[email protected]

 

Internet: 

www.ferno.co.uk

 

 
 
 
 

Summary of Contents for CCT Six - M

























Reviews: