Ferno CCT-PX, User Manual

Page: 30 / 40

FERNO/MAN/1121/226-R3/UK
30
To attach a child harness such as PediMate, PediMate PLUS
or Neomate to a trolley, the procedure laid out in the relevant
user manual supplied with each product should be studied and
followed. On POWERX and CCT-PX there are dedicated fixing
points for attachment of the certain child harnesses.
PediMate, PediMate PLUS and Neomate top straps are attached
to POWERX/CCT-PX in the same way as with any other trolley,
where the top fixing straps are wrapped around the back of the
trolley, fastening them together using the buckle and clasp at the
end of each strap and then fully tightening the straps once the
whole harness has been attached and correctly positioned on the
trolley.
Loop for attaching lower fixing straps of PediMate on
Biosafe cross strap
Attaching Pedimate top straps behind the backrest
7 - PREPARING TO TRANSPORT A PATIENT
Preparing to Transport a Patient
7.8 - Attaching a Child Harness
(PediMate / Neomate)
Unlike traditional tubing-framed trolleys such as Pegasus, the
lower straps of the PediMate child harness are attached to the
CCT-PX trolley frame utilising incorporated loop straps that are
located at the ends of the cross-straps where they attach onto to
the trolley frame, half way down the trolley
Take one of the Pedimate lower attachment straps, detach the
clasp from the buckle by depressing the button on the buckle,
feed the clasp through the loop strap and then reconnect
together into the buckle again, ensuring they are firmly attached.
Do this on both sides of the trolley.
7.8 - Attaching a Child Harness (cont...)
Once all straps have been attached and correctly positioned ,
re-tighten each strap making sure that the PediMate remains
central to the trolley, in the correct position and firmly attached
such that there is no movement.
PediMate PLUS securely attached to trolley