40
© Ferno Australia / ID: 00184-V7 / AUG 2020
INSPECTION & MAINTENANCE
INSPECTING THE HEADS OF EACH LEG
Standard Leg
(Fig 73)
1. Remove the Qik Link pin from the leg and inspect the pin for any
damage or deformation. Inspect the cable on the Qik Link pin that
holds the pin on to the head for damage. In the event of damage or
deformation, contact service agent for repair.
2. Inspect the hinge attachment points (hinge cut-outs) and ensure
they are not damaged and that the Qik Link pin inserts easily into
the hinge cut-outs. Ensure the Qik Link pin locks into the spring
keeper and that the Qik Link pin is held firmly into place once
inserted into the head attachment point.
3. Inspect the rated load attachment point (eyebolt) and ensure it can
swivel 360˚ and that the top holding nut weld is intact and has not
been tampered with. Ensure the eye is not deformed and there is
no evidence that the attachment point has been overloaded. In the
event of overloading or deformation the leg must be permanently
removed from service.
4. Inspect Stabilisation Attachment Point (D-shackle) for deformation
or damage. In the event of deformation or damage, replace the
D-shackle.
5. Ensure head moves and swivels easily on the leg and there is no
binding up of the movement.
6. Ensure the Head/ Leg bolt is tight and secure. If the head/ leg
connecting bolt is loose, remove the bolt and apply Loctite® 7262
thread locking compound to the threads and re-tighten the bolt.
Be careful not to cross-thread the bolts as the product will become
unsafe, dramatically reduce the WLL and be dangerous to use. If
cross threaded, the unit must be sent back to Ferno Australia.
7. Inspect the entire head for damage, gouging, deformation and
indentations. Normal wear and tear is acceptable. However if
obvious damage is noticeable, return to Ferno or an authorised
agent for repair or replace the entire leg unit.
8. Inspect the load rating labels on either the head or leg and ensure
all the information is legible.
Leg Pin
Hinge attachment
point for additional
legs (hinge cut-out)
D-Shackle
Eye bolt
Head/Leg Bolt
73
Summary of Contents for Arachnipod
Page 53: ......
