background image

4

© Ferno Australia / ID: 00184-V7 / AUG 2020

SAFETY INFORMATION

NOTICE

EMPLOYER: It is your responsibility to ensure all users are instructed and trained in the correct use and maintenance of the 

equipment. Once equipment is issued, it is assumed this has been completed.

USER: Only competent users should use this equipment. It is your responsibility to read and understand these instructions 

and be properly trained in the use of this equipment. Always use equipment safely and properly. Check equipment before 

and after each use 

GENERAL:  This document is not intended as a substitute for appropriate training. Training, practice and experience in 

technical rigging are essential for safe use. Modifying the equipment can cause injury and damage and will nullify any 

warranty and place full responsibility for any accident or injury on the equipment owner.

Working at heights and in confined spaces can be dangerous. If you use Ferno equipment, you are responsible for 

learning and observing safe techniques. Ferno Australia disclaims all liability for any injury or loss arising from the 

use of this equipment when any of its components are damaged or weakened by wear and tear.

Summary of Contents for Arachnipod























































Reviews: