Ferno 35A-NM User Manual Download Page 3

Page: 3 / 32

Model 35A-NM

TABLE OF CONTENTS

Section Page

Ferno Customer Relations ______________________ 2

Ferno Technical Support _______________________ 2

1 - Safety Information ___________________________ 4

1.1 Warning ________________________________ 4

1.2 Important _______________________________ 4

1.3 Bloodborne Disease Notice _________________ 4

1.4 Cot and Fastener Compatibility _____________ 4

1.5 Safety and Instruction Labels _______________ 5

1.6 Symbol Glossary _________________________ 5

1.7 MR Conditional Testing and Compliance ______ 6

2 - Operator Skills and Training __________________ 7

2.1 Skills __________________________________ 7

2.2 Training ________________________________ 7

2.3 Height and Strength Considerations __________ 7

3 - About the Cot _______________________________ 8

3.1 Description _____________________________ 8

3.2 General Specifications

____________________ 9

3.3 Cot Positions ____________________________ 9

3.4 Components ___________________________ 10

4 - Setup and Installation _______________________ 11

4.1 Ambulance Information __________________ 11

4.2 Fastener Compatibility ___________________ 11

4.3 Installing the Safety Hook ________________ 11

4.4 Patient Restraints _______________________ 13

5 - Using the Features __________________________ 14

5.1 Lift-First Control Handles _________________ 14

5.2 Lower Lift Frame _______________________ 14

5.3 Adjustable Backrest _____________________ 15

5.4 Sidearms ______________________________ 15

5.5 Wheel Locks ___________________________ 15

5.6 Shock Frame ___________________________ 16

5.7 Two-Position Drop Frame _________________ 16

6 - Using the Cot ______________________________ 17

6.1 Before Placing the Cot in Service ___________ 17

6.2 General Guidelines for Use ________________ 17

6.3 Fully Engaging the Locking Mechanism _____ 17

6.4 Raising and Lowering the Cot _____________ 18

6.5 Transferring the Patient to the Cot __________ 19

6.6 Rolling the Cot _________________________ 20

6.7 Preparing to Load the Cot _________________ 21

6.8 Loading the Cot _________________________ 21

6.9 Unloading the Cot _______________________ 22

6.10 One Operator, Empty Cot _________________ 23

6.11 Using Additional Help ___________________ 24

7 - Maintenance _______________________________ 25

7.1 Maintenance Schedule ___________________ 25

7.2 Disinfecting and Cleaning the Restraints _____ 25

7.3 Disinfecting and Cleaning the Mattress ______ 25

7.4 Disinfecting the Cot _____________________ 25

7.5 Cleaning the Cot ________________________ 26

7.6 Waxing the Cot _________________________ 26

7.7 Inspecting the Cot _______________________ 26

7.8 Lubricating the Cot ______________________ 27

8 - Accessories and Related Products _____________ 28

9 - Parts and Service ___________________________ 28

9.1 U.S.A. and Canada ______________________ 28

9.2 Worldwide _____________________________ 28

9.3 Parts List ______________________________ 29

Training Record ______________________________ 30

Maintenance Record ___________________________ 31

Summary of Contents for 35A-NM

































Search results

Summary of Contents for 35A-NM

Reviews:

Ferno 35A-NM, User Manual, Page: 3 / 32

Search results

Summary of Contents for 35A-NM

Reviews: